Parts:
|
| (1) |
rail
bracket |
|
(1) |
3/8"
female heim |
| (1) |
pedal
bracket |
|
(1) |
3/8-24xl 1/2" bolt |
| (1) |
pedal |
|
(8) |
3/8-24xl" bolt |
| (1) |
1/2-20x1" bolt |
|
(9) |
3/8-24 nylok nut |
| (1) |
1/2x
1-1/4" flat washer |
|
(9) |
3/8"
flat washer |
| (1) |
1/2"
lock washer |
|
|
|
| 1. |
The
rail bracket bolts to your frame using four each of the
3/8-24x1" bolts, 3/8-24 nylok nuts, and 3/8 washers
under the nuts. |
| 2. |
The
pedal bracket bolts to the rail bracket using four each
of the 3/8-24xl" bolts, 3/8-24 nylok nuts, and 3/8
washers under the nuts. |
| 3. |
The
pedal slides on to the round pivot bar and is secured
with the 1/2-20xl" bolt, 1/2" flat washer, and 1/2" lock
washer. |
| 4. |
Bolt
the booster bracket on and thread a jam nut on the
push-rod followed by the 3/8" female heim. Thread the
heim so that the pedal has as much stroke as possible
without it being topped-out. Then, bolt the heim on
using the 3/8-24xl 1/2" bolt, 3/8-24 nylok nut, and 3/8
washer under the nut. |
|
